Solidcam 2010 Sp3 Hp1 for Solidworks 2007-2011 32bit/64bit

http://www.solidcam.com/
Avatar de Usuario
stey
Grupo Cad/Cam/Cae
Mensajes: 27
Registrado: Octubre 11th, 2009, 12:18 am
Contactar:

Solidcam 2010 Sp3 Hp1 for Solidworks 2007-2011 32bit/64bit

Mensaje sin leer por stey » Diciembre 25th, 2010, 4:49 pm

Solidcam 2010 Sp3 Hp1 for Solidworks 2007-2011 32bit/64bit (2010/ENG) | 555 MB

SolidCAM - CAD / CAM system developed by a new generation of Israeli firm SolidCAM Ltd (official distributor in Russia - Consistent Software). This system is a complete solution for automating the production of metal. Using a wide range of proposed strategies SolidCAM turning, milling, turning, milling and electrical discharge machining process engineer can in a short time to prepare the necessary set of control programs for machining of the product.
Functionality SolidCAM 2010
Support for 64bit computing by having a special version for SW 64bit


2.5-axis milling
SolidCAM provides high efficiency and accuracy of the 2.5-axis milling parts. Supports different strategies for handling items such as contour, sampling (including islands) and a groove, as well as various types of hole machining: drilling, reaming, threading, etc. The system has a wide range of features 2,5-axis machining of analytic surfaces.

3-axis milling
SolidCAM provides a wide range of tools that can be effectively used for treatment of products with complex geometry (dies, molds) and prismatic parts. As the geometry for a 3-axis machining using a three-dimensional surface or solid model. The system supports various types of strategies for roughing and finishing, such as the RIP with the specified or automatically determined by the angle of the raster processing of equidistant, the projection processing, handling at the waterline, etc.

In addition to the listed capacity 2,5 - and 3-axis machining, SolidCAM provides tools to identify and refine areas not treated in previous transitions. You can create a database of typical technological processes. Once created, a parameterized process can be reused in the future, which significantly reduces the pre-production, improves the reliability of the developed programs, unifies the style of technological development, guarantees the use of only the best technologies for processing and ensures the independence of the production of the human factor. Lack zarezany guarantee the availability of means of control and visualization of machining.

Multi-Processing
SolidCAM provides various tools for creating control programs of the multi-processing of 4 - and 5-axis machining centers. The model is set in a user-plane processing, after which the system automatically calculates all necessary parameters for the displacement and rotation of zero items. As a result, significantly reduces set-up time of transition and increases accuracy.

Lathes and milling
SolidCAM has lots of features to automate the creation of control programs for turning and turning and milling. SolidCAM supports various types of tool that allows you to effectively perform longitudinal turning, facing, grooving, etc. In addition, SolidCAM automatically perform roughing and finishing of complex contours. Support rotating tool allows you to perform milling and drilling transitions to processing centers.

Spark erosion
The proposed set of strategies SolidCAM Wire EDM allows processing of external and internal contours of constant and variable angle. The possibility of 4-axis machining. Special algorithm to prevent the fall of the treated material. SolidCAM provides the user with a means for controlling the physical parameters of the processing on the entire trajectory of the wire.


http://www.filesonic.com/file/34512237/ ... .part1.rar
http://www.filesonic.com/file/35329791/ ... .part2.rar
http://www.filesonic.com/file/34512235/ ... .part3.rar
http://www.filesonic.com/file/34512233/ ... .part4.rar
http://www.filesonic.com/file/34512239/ ... .part5.rar
http://www.filesonic.com/file/34470117/ ... .part6.rar

http://www.fileserve.com/file/WKW5FNU
http://www.fileserve.com/file/A7Ua2X6
http://www.fileserve.com/file/ZHB3rcT
http://www.fileserve.com/file/RKPtd57
http://www.fileserve.com/file/S3aXh9z
http://www.fileserve.com/file/TSvB7nY

HAZUKI
Mensajes: 2
Registrado: Diciembre 27th, 2010, 11:21 am
Contactar:

Re: Solidcam 2010 Sp3 Hp1 for Solidworks 2007-2011 32bit/64b

Mensaje sin leer por HAZUKI » Diciembre 27th, 2010, 2:43 pm

Hola gente !!

Primer mensaje, espero que sea útil.

He visto en varios sitios que hay gente con problemas para emular el Aladdin.
Quería comentaros que con el emulador que venía con la versión 2008 funciona perfectamente. Al menos la versión 32 bits. En unos dias instalaré la de 64 bits y os comento.

yesid.corrales
Grupo Máquina Herramienta
Mensajes: 2
Registrado: Junio 27th, 2011, 8:39 pm
Contactar:

Re: Solidcam 2010 Sp3 Hp1 for Solidworks 2007-2011 32bit/64b

Mensaje sin leer por yesid.corrales » Agosto 27th, 2011, 9:44 pm

saludos a todos los del blog, instale el solidcam2010 y empece a programar muy bien hasta el monento, pero al posprocesar no pude encontrar un posprocesador para cuarto eje ya que en la configuracion del programa no aparece para cuarto eje, muchachos alguien sabe como hacerlo ya que lo posproceso con el pos de quito eje pero no sale el codigo. Quedo agradecido por la colaboracion prestada. MI correo es yesid.corrales@gmail.com

Responder

Volver a “SolidCam”

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 3 invitados