Rhinoceros v4.0 SP3 2008.02.22

http://www.es.rhino3d.com/
Avatar de Usuario
Mecaman
Administrador del Sitio
Administrador del Sitio
Mensajes: 648
Registrado: Noviembre 24th, 2008, 11:16 pm
Ubicación: barcelona
Contactar:

Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por Mecaman » Noviembre 27th, 2008, 7:57 pm

Imagen
Imagen


Hardware:
Pentium, Celeron, or higher processor.
200 MB disk space.
512 MB RAM. 1 GB or more is recommended.
OpenGL graphic card recommended.
IntelliMouse recommended.
3-D digitizer optional.
3-D printer optional.
Operating systems:
Rhino 4.0 runs only on Windows 2000, XP Pro, XP Home, and Vista* including an Intel Mac with BootCamp or Parallels.
*Vista requires Rhino 4.0 Service Release 1 or above.
Rhino 4.0 will not run on Windows NT, 95, 98, or ME.
Native Windows x64 is not supported and will not be until the required development tools and libraries are available. There will be a free service release available as soon as possible after 4.0 ships. Rhino 4.0 does run as a 32-bit application on Windows x64.
Rhino 4.0 does not run natively on Mac OS X, but it is under development. Details...
Rhino 4.0 does not run natively on Linux, or any other operating system not listed above.


What's New, SR3 (22-Feb-2008)
New Features:
Angle input added: Angle formats for rotate-related commands (Rotate, Rotate3D, ArrayPolar, RotateEdge, etc.) now can accept decimal degrees; degrees, minutes, seconds, gradians, and radians.
ToolbarLock: New command. Locks docked toolbars into place.
Enhanced Features:
Layout: PageLayout is now a built-in alias for the Layout command
Purge: Now deletes bitmaps saved as Wallpaper.
Sweep2: The rebuild curves option now allows the number of control points to be reduced to 2.
Bug Fixes:
3DFace: now supports ortho from the previous point, and it is now possible to snap to all previous points with the Point osnap
Alt+Drag did not properly copy selected control points. This is fixed.
BlendCrv: Input curves were sometimes not properly deleted. This is fixed.
BlendCrv: When using Trim=Yes and Join=Yes, the input curves are left behind. Result is that you have the two curves joined with the blend and the original two curves left. This is fixed.
Booleans: Several failure bugs fixed.
Crash bugs fixed: Dozens of crashes have been fixed throughout Rhino: Display, Meshing, Pullback curves to surfaces, Toolbars, Object Sorting, File I/O, STEP, Cancelling of time-consuming tasks, Drag & Drop Files, NetworkSrf, Curve-Surface intersection, Worksessions, Hatch UI, ArrayOnSrf, Dialog Localization.
Dimensions: Dimensions inside blocks did not display correctly when the view was rotated. This is fixed.
Dual monitor: Resizing the main Rhino window so it stretched across two monitors then closed and re-opened Rhino, the main window was incorrectly sized to fit the main monitor or the monitor that contains most of the window rectangle.
Now Rhino will let the window span multiple monitors and will only move or resize the window if one or more edges is off all the monitors.
Edit Toolbar button dialog box now supports Ctrl+A to select all of the text in an edit box.
Fair: The command did not stick closely enough to the tolerance. This has been improved.
FilletCorners: A failure bug has been fixed.
FilletEdge: Failed in some instances using a bad surface as input.
FilletEdge: Handles placed at surface seams could be incorrectly oriented. This is fixed.
HideInDetail: Objects hidden with the HideInDetail command incorrectly responded to object snaps in active views. This is fixed.
Intersect: Failed on some closed polysurfaces. This is fixed.
Intersect: Several failure bugs have been fixed.
Layer: Dragging layers with parents and children did not work correctly. This is fixed.
MergeFace did not use the default angle tolerance. This is fixed.
Mesh: One problem with slow meshing has been fixed.
OffsetNormal: A curve resulting from offsetting the edge of a sphere incorrectly contained a kink at the equator. This is fixed.
Open:DWG/DXF: Inserting or Importing dwg or dxf files incorrectly set the linetype scale in rhino to whatever it is in the AutoCAD file. This is fixed.
Open:DWG/DXF: Now only lightweight polylines with straight segments are read as polycurves.
Open: A crash opening earlier Rhino files with GHS data has been fixed with the HOT FIX release.
Osnap:Int: When zoomed out, too many objects could be in the pickbox causing a slowdown. This is fixed.
Pipe: When the Thick and Global options were used, the command incorrectly did not make the pipe correctly. This is fixed.
Properties: Leader properties for multiline text incorrectly displayed only one line. This is fixed.
Render: Alpha channel incorrectly contained transparency information when "transparent background" was not selected. This is fixed.
Render: When Rhino did not have focus, the render calculated was wrong. This is fixed.
Save:GHS: A crash bug has been fixed.
Save:STL: A crash has been fixed.
Save:STL: A problem with some objects not meshing properly has been fixed.
Split: Several failure bugs have been fixed.
Splop: A crash when the surface is a block insert has been fixed.
Sweep2: Weighted points are respected in any combination if the curves are otherwise also set up for Simple sweeps. Simple Sweeps to rational rails also accurately follow the rails now.
SynchronizeViews: The viewport display as set with SynchronizeViews was not saved. This is fixed.
Text: Text in a block object did not display properly if the block was rotated to another plane. This is fixed.
Toolbars: Rhino flyout toolbars did not work properly with Wacom Intuos tablets. This is fixed.
Trim: Several failure bugs have been fixed.
Trim: Several failure bugs have been fixed.
UnrollSrf: A failure bug with trimmed and flipped surfaces has been fixed.
UnrollSrf: Curves could be incorrectly split. This is fixed.
ViewportProperties: The wallpaper bitmap was not updating properly after a change to the bitmap file. This is fixed.
What: New information added - edge and vertex tolerance.
Worksession: The state of child layers was not correctly restored with the worksession file. This is fixed.


Rhinoceros v4.0 CD Lite - 89.03 Mb (18 2007)

http://rapidshare.com/files/100281192/R ... te-ISO.rar


RH40-MHA2-C47A-UE92-EWAQ-9HP8
RH40-QA20-A4RT-9A8N-67AK-1H4B
RH40-M8TG-XAXT-UE9X-0XBK-8KU2
RH40-V3AG-T0QQ-BF9J-15A8-9GJ1
RH40-M0B2-E4CE-369E-3XBL-1GJ8
RH40-Q022-E6DE-378X-94AL-8M55
RH40-MKK2-Q62A-HF8A-34A4-0LV7

Rhinoceros v4.0 SP2a RC3 Update - 55.65 Mb (17 окт 2007)

http://rapidshare.com/files/100284424/R ... .10.17.rar

Rhinoceros v4.0 SR2a HotFix 1 - 4.37 Mb

http://rapidshare.com/files/100285232/R ... .12.20.rar

Rhinoceros v4.0 SR3 Update - 54.86 Mb (22 февр2008)

http://rapidshare.com/files/100284618/R ... .02.22.rar

ingsilver
Mensajes: 8
Registrado: Enero 22nd, 2009, 6:53 pm
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por ingsilver » Marzo 3rd, 2009, 6:37 pm

está muy bueno este post, creo que ya salió el SR5, ojalá pudieras postearlo de ser cierto
una pregunta: ¿funciona rhino en vista a 64 bits?

ribei23a
Mensajes: 1
Registrado: Julio 21st, 2009, 11:44 am
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por ribei23a » Julio 21st, 2009, 1:08 pm

cuál es la contraseña de este rar??


Rhinoceros v4.0 CD Lite - 89.03 Mb (18 2007):
http://rapidshare.com/files/100281192/R ... te-ISO.rar

Gracias y un saludo

didinos
Mensajes: 3
Registrado: Octubre 14th, 2009, 10:37 pm
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por didinos » Octubre 14th, 2009, 11:53 pm

please post the password for the rar file.
thank you

didinos
Mensajes: 3
Registrado: Octubre 14th, 2009, 10:37 pm
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por didinos » Octubre 15th, 2009, 12:13 am

please post the password for the rar file Rhinoceros-4-CD-Lite-ISO
email marblemaster78@gmail.com
thank you

Avatar de Usuario
megacam
Moderador Global
Moderador Global
Mensajes: 13577
Registrado: Enero 18th, 2009, 12:13 am
Ubicación: barcelona
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por megacam » Octubre 15th, 2009, 12:21 am

Hi :grin:

Password: 51render.com

didinos
Mensajes: 3
Registrado: Octubre 14th, 2009, 10:37 pm
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por didinos » Octubre 18th, 2009, 12:27 am

not correct password

luchito77
Mensajes: 1
Registrado: Marzo 8th, 2010, 4:38 am
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por luchito77 » Abril 11th, 2010, 7:35 pm

gracias por el aporte :-bd :-bd

Mr.Jose
Mensajes: 1
Registrado: Abril 19th, 2010, 3:49 pm
Contactar:

Re: Rhinoceros v4.0 SP3 2008.02.22

Mensaje sin leer por Mr.Jose » Abril 19th, 2010, 5:47 pm

Gracias, comenzando un nuevo programa.

Responder

Volver a “Rhinoceros”

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 21 invitados